VOLVO
ABS-0097 - Control module. Excessive configuration time
System
Bremsesystem (ABS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The ABS control module is programmed at the factory for several car models and configures itself at the first ignition cycle, using car configuration data from the central electronic module (CEM). The code is set if the configuration takes too long, for example when the data from the CEM arrives late. Communication faults may be behind it.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Open circuit in the communication wires
- Faulty central electronic module (CEM)
Hva du kan gjøre
- 1Check the central electronic module (CEM) first, since an incorrectly configured CEM can affect the ABS module's configuration
- 2Read and clear any codes in the CEM, and trace those before the ABS module
- 3Reset and configure the ABS module according to the workshop routine, with the correct car model selected
- 4Afterwards, check that the configuration is correct for the car
- 5ABS is safety-critical – do not work on the ABS module's configuration yourself, have a workshop do it
Symptomer du kan merke4
- Traction control does not work
- Stability control is not working
- ABS warning lamp lit
- Traction control warning lamp lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.