VOLVO
ABS-00B5 - Communication control unit SAS signal quality
System
Bremsesystem (ABS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
When the ignition is switched on, the ABS control module checks that the system signals are reasonable. If the signal quality from the steering angle module (SAS) is found to be too poor, the code is set. The fault most likely lies in that module. This code applies only to cars with stability control, while anti-spin and stability are blocked.
Mulige årsaker
- Probably a code already stored in the steering angle module (SAS)
Hva du kan gjøre
- 1Read the codes in the steering angle sensor control unit and deal with those first
- 2Clear the codes and road test to see whether they return
- 3Check the battery and its terminals, since voltage drops can give faulty signals
- 4If the fault remains, have a workshop with diagnostic equipment trace the steering angle sensor control unit
- 5ABS, stability and steering are safety-critical – do not work on these systems yourself, have a workshop do it
Symptomer du kan merke3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Hva feilen kan påvirke2
- Anti-spin function is blocked
- Stability function is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.