VOLVO
ABS-00B6 - Communication control unit Internal fault in CAN or SAS
System
Bremsesystem (ABS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The ABS module has not picked up the reading from the steering angle sensor, which the SAS module puts onto the data network. The cause can be disturbances on the data network or an internal fault in the steering angle sensor control unit. This code applies only to cars with stability control, and anti-spin and stability are blocked.
Mulige årsaker
- Disturbances on the CAN network
- Internal fault in the steering wheel angle sensor (SAS) control unit
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM) and in the steering angle sensor control unit
- 2Troubleshoot according to the codes in those systems
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the steering angle sensor control unit
- 5ABS, stability and steering are safety-critical – do not work on these systems yourself, have a workshop do it
Symptomer du kan merke3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Hva feilen kan påvirke2
- Anti-spin function is blocked
- Stability function is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.