VOLVO
ABS-00C2 - Reversing signal. Unreasonable signal
System
Bremsesystem (ABS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The reversing signal tells the ABS control module that the car is in reverse. The module has registered a signal that does not fit the other conditions, so the code is set. This code applies only to cars with stability control, and anti-spin and stability are blocked while it is present.
Mulige årsaker
- Faulty signal from the reversing light sensor or switch
- Short or open circuit in the reversing signal wire
- Faulty ABS control module
Hva du kan gjøre
- 1Check that the reversing lights work when reverse gear is selected
- 2Check the connectors at the gear selector and the reversing signal for poor contact and oxidation
- 3Follow the reversing signal wire and look for an open circuit or a short to ground or supply voltage
- 4Clear the code and road test in reverse to see whether it returns
- 5If the fault remains, have a workshop with diagnostic equipment check the signal and the ABS control module
- 6ABS and stability control are safety-critical – do not work on the ABS module or the brake system yourself, have a workshop do it
Symptomer du kan merke3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Hva feilen kan påvirke2
- Anti-spin function is blocked
- Stability function is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.