VOLVO
ADM-0001 - Additive dosing module (ADM). Internal fault
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The additive dosing module (ADM) has detected an internal fault in itself. The ADM is fitted to diesel cars with a particulate filter and doses an additive into the fuel that helps the soot in the filter burn off more easily during regeneration.
Mulige årsaker
- Internal fault in the additive dosing module (ADM)
- A one-off disturbance as the module started up, if the fault has only occurred once
Hva du kan gjøre
- 1Clear the code and see whether it returns – a single intermittent fault can be a temporary disturbance
- 2Check that the battery is in good condition, as low voltage at start-up can cause false internal faults
- 3If the fault returns or is permanent, the additive dosing module needs replacing
- 4Have the particulate filter checked if the car has been driven with the fault for a long time
Symptomer du kan merke2
- Message in the information display
- Engine (emissions) warning lamp on
Hva feilen kan påvirke1
- No immediate effect on driving, but without additive the particulate filter is harder to regenerate and may eventually block
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.