VOLVO
ADM-0003 - Level sensor, additive. Faulty signal
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The level sensor for the additive gives the additive dosing module (ADM) a signal that cannot be trusted. The ADM checks the sensor's function with the ignition on, and when the signal is faulty or implausible the code is set. Because the sensor is built into the additive tank, the tank itself may need replacing if the fault persists.
Mulige årsaker
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Hva du kan gjøre
- 1Check the connector at the additive tank for looseness, contact resistance and oxidation
- 2Clear the code and check whether it returns
- 3If the fault returns with no visible cause, the additive tank may need replacing because the sensor is built into it
- 4After any repair, have a workshop restart the module with diagnostic equipment
Symptomer du kan merke2
- Message in the text window of the display
- Yellow warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.