VOLVO
ADM-0007 - Pump, additive. Signal too low
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The additive dosing module (ADM) has registered a short circuit to ground in the wiring to the additive pump. The ADM controls the pump, and a short to ground stops it working normally. The fault shows up as the emissions warning lamp, and because the pump sits in the additive tank, the tank may need replacing.
Mulige årsaker
- Short circuit to ground in the wiring to the additive pump
- Damaged additive pump
- Damaged additive dosing module (ADM)
Hva du kan gjøre
- 1Check the connector at the additive tank for damage and moisture
- 2Follow the pump wiring and look for chafing or damaged insulation
- 3Clear the code and check whether it returns
- 4If the code returns with no visible cause, the additive tank may need replacing
- 5If the fault remains, have a workshop with diagnostic equipment check the pump and the module
Symptomer du kan merke1
- Emissions warning lamp lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.