VOLVO
ADM-000A - Vehicle speed. Faulty signal
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The additive dosing module (ADM) has registered that the vehicle speed signal on the data network is faulty or missing. The signal comes from the brake control module (BCM), so the fault usually starts there. The code cannot be cleared until the fault in the brake control module has been remedied.
Mulige årsaker
- Fault in the brake control module (BCM), which sends the speed signal
Hva du kan gjøre
- 1Read the codes in the brake control module (BCM) first and deal with those
- 2Clear the code only after the fault in the brake control module has been fixed, because it cannot be cleared before then
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the brake control module
- 5The brake control module is safety-critical – do not work on the brake system yourself, have a workshop do it
Symptomer du kan merke1
- No clear symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.