VOLVO
ADM-E003 - Configuration fault
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The ADM checks its own configuration ID against the one that the CEM broadcasts on the data network. If the IDs do not match, or if communication between the ADM and CEM is broken, the code is set. A used control module with different software can cause this.
Mulige årsaker
- Incorrect CAN configuration ID, for example a used module with other software or hardware fitted
- Open circuit in the CAN wire between the module and the central electronic module (CEM)
Hva du kan gjøre
- 1Find out whether a control module has been replaced, especially a used one, and whether new software was downloaded at the time
- 2Read the codes in the CEM and deal with any communication faults first
- 3Check that the wires between the module and the CEM have no breaks and that the connectors are secure
- 4Have a workshop download the correct software to the module if it does not match the car
- 5Clear the code and check that it does not return
Symptomer du kan merke1
- No clear symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.