VOLVO
ADM-E010 - Power supply control module. Signal too low
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Kun motor: D4164T
- Volvo C70 (2006–2013)2008–2010Kun motor: D4204T
- Volvo S40 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Kun motor: D4164T
- Volvo V50 (2004–2013)2005–2006Kun motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Kun motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Kun motor: D4164T
Hva betyr feilkoden?
The additive dosing module (ADM) compares its own power supply with what the central electronic module (CEM) reports. This code is relevant only when the engine control module has also stored a code for faulty or missing communication with the ADM. Otherwise it does not indicate a fault and can simply be cleared.
Mulige årsaker
- Poor contact, resistance or corrosion at the terminals
- Open circuit in the power supply
- Power supply shorted to ground
- Damaged additive dosing module (ADM)
Hva du kan gjøre
- 1Check whether the engine control module has stored codes for communication with the ADM; if not, the code can be cleared without further action
- 2Check that the battery and its terminals are in good condition
- 3Check the connectors at the ADM for looseness, resistance and corrosion
- 4Check that the power supply and ground connection to the ADM are intact
- 5If the fault persists together with communication faults, have a workshop trace the supply and the module
Symptomer du kan merke1
- No clear symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.