VOLVO
ADM-P192329 - Fuel Additive Level Circuit Range/Performance. General Signal Failures. Signal signal invalid
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The ADM has registered that the signal from the additive level sensor lies outside its permitted range, meaning it is faulty or implausible. Because the sensor is part of the additive tank, the tank may need replacing if the fault persists.
Mulige årsaker
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Hva du kan gjøre
- 1Check the connector at the additive tank for looseness, resistance and corrosion
- 2Clear the code and road test to see whether it returns
- 3If the fault persists with no visible cause, the tank may need replacing because the sensor is built into it
- 4After any repair, check that the code does not come back
Symptomer du kan merke1
- Message in the text window of the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.