VOLVO
ADM-P193115 - Fuel Additive Pump Control Circuit High. General Electrical Failures. Circuit short to battery or open
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The ADM monitors the additive pump control circuit and has registered a short to supply voltage on the pump's wiring. The fault shows up as the emissions warning lamp. Since the pump sits in the additive tank, the tank is usually the part replaced if the fault persists.
Mulige årsaker
- Pump wiring shorted high to the supply
- Damaged additive pump
- Damaged additive dosing module (ADM)
Hva du kan gjøre
- 1Follow the pump wiring and look for chafing or damaged insulation
- 2Check the connector at the additive tank for damage and moisture
- 3Clear the code and check whether it returns
- 4If the code returns with no visible cause, the additive tank may need replacing
- 5If the fault remains, have a workshop with diagnostic equipment check the pump and the module
Symptomer du kan merke1
- Emissions warning lamp lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.