VOLVO
ADM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Additivdoseringsmodul (ADM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The ADM has not received the vehicle configuration it expects from the CEM, so its initial configuration is not finished. The code is set when that information is missing after the ignition is switched on. It is often a communication break on the CAN network.
Mulige årsaker
- Incorrect CAN configuration ID, for example after fitting a used module with other software or hardware
- Open circuit in the CAN wire between the module and the CEM
Hva du kan gjøre
- 1Read the codes in the CEM first, since communication faults often go together with them
- 2Check that the ADM module is not second-hand with the wrong software, and whether new software was loaded after fitting
- 3Check the connectors and the wiring between the ADM and the CEM for breaks
- 4With diagnostic equipment check the data network
- 5Clear the code only once the cause is fixed, and check that it does not return
Symptomer du kan merke1
- No clear symptoms for the driver
Hva feilen kan påvirke1
- The module answers diagnostic commands, but normal CAN communication does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.