Hva betyr feilkode AEM-6C50?

Diagnose og feilkodedefinisjon for AEM-6C50 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Bestill reparasjon hos OBD Tuning.

VOLVO

AEM-6C50 - Alarm output P0. Signal too low or signal missing. Permanent fault

System

Tilbehørsmodul (AEM)

Volvo-modeller feilkoden gjelder for

Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

Gjelder følgende modeller:

5 modeller

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

The AEM has registered a signal that is too low, or a break, on the signal wire to alarm output P0, and the fault is still present. The alarm does not work at all. The cause is usually a short to ground or a break in the signal wire, or a damaged alarm.

Mulige årsaker

Signal wire for alarm output P0 shorted to ground
Break in the signal wire for alarm output P0
Damaged alarm

Hva du kan gjøre

1Look for damage on the signal wire to alarm output P0
2Check the alarm connectors for oxidation and loose connections
3Clear the code only after the wire has been checked, and confirm that it does not come back
4If the fault remains, have the alarm replaced by a workshop after checking

Symptomer du kan merke1

The alarm does not work at all

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.