VOLVO
AEM-6C51 - Alarm output P0. Signal too high. Permanent fault
System
Tilbehørsmodul (AEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The signal on the wire to alarm output P0 is too high while that output is activated, and the fault is still present. The alarm does not work at all. The cause is usually a short to supply voltage in the wire or a damaged alarm.
Mulige årsaker
- Signal wire to alarm output P0 shorted to supply voltage
- Damaged alarm
Hva du kan gjøre
- 1Look for damage on the signal wire to alarm output P0
- 2Check the alarm connectors for oxidation and loose connections
- 3If the fault remains, have the alarm replaced by a workshop after checking the wire
Symptomer du kan merke1
- The alarm does not work at all
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.