VOLVO
AEM-6C56 - Alarm output S1. Signal too low. Intermittent fault
System
Tilbehørsmodul (AEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
At some point the AEM registered a signal that was too low on the S1 alarm output wire while that output was activated. The fault is intermittent and may not be present now. Output S1 is disabled until the next ignition cycle, and the alarm does not work in the meantime.
Mulige årsaker
- Signal cable for alarm output S1 shorted to ground
- Damaged alarm
Hva du kan gjøre
- 1Follow the S1 alarm output wire and look for intermittent chafing or shorts to ground
- 2Check the alarm connectors for oxidation and loose connections
- 3Clear the code and check whether it returns
- 4If the fault returns, have a workshop check the alarm
Symptomer du kan merke1
- The alarm does not work at all
Hva feilen kan påvirke1
- Output S1 is disabled until the next ignition cycle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.