VOLVO
BCM-0011 - Wheel sensor left front. Faulty signal
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) has registered that the left front wheel is stopping or turning too slowly compared with the other wheels, or changing speed unnaturally fast. The sensor signal therefore does not match reality. The cause usually lies in the mechanics around the wheel rather than in the electrical circuit.
Mulige årsaker
- The wheel has locked during driving, for example due to a sticking brake caliper
- Loose wheel sensor or an incorrect gap between sensor and tone ring
- Bearing play or axle vibration
- Defective or dirty tone ring
- Defective wheel sensor or dirt between the tone ring and the sensor
Hva du kan gjøre
- 1Check that the brake caliper on the left front wheel is not sticking and that the wheel turns freely
- 2Check the wheel bearing for play and noise
- 3Check that the wheel sensor sits flush against the spindle or hub with no dirt underneath
- 4Check that the tone ring is securely fitted, complete and free from damage or missing teeth
- 5Clear the code and road test; if it returns, have a workshop check the sensor. Do not replace the brake control module for this code
- 6The brake system is safety critical: the brakes work without ABS, so drive carefully and avoid hard braking until the fault is fixed
Symptomer du kan merke4
- ABS warning lamp on
- Information lamp on
- ABS, traction control and stability function do not work
- With an intermittent fault the ABS lamp may only go out some way into the next drive
Hva feilen kan påvirke3
- ABS is disabled
- Electronic brake force distribution (EBD) is disabled if two or more wheel sensors have failed
- Traction control, stability control, active yaw control (AYC) and brake assist are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.