VOLVO
BCM-0050 - Control module. Faulty signal
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) has registered an internal problem, for example interference or an open circuit in the circuit to the hydraulic valves. Interference may have affected the module's calculations, so the code can be set even when the fault is not visible right now.
Mulige årsaker
- Electrical interference that has affected the module's calculations
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Read the codes and deal with any other stored codes first, as they may share the same cause
- 2Clear the code and check whether it returns; if it does not come back, no further action is needed
- 3Check the brake control module connector for contact resistance and oxidation, and make sure the wiring is not close to interference sources such as mobile phones
- 4If the fault remains as permanent, have a workshop replace the brake control module
- 5The brake system is safety critical: drive carefully until the fault is fixed, as ABS and stability control are out of action
Symptomer du kan merke5
- General warning lamp on
- ABS warning lamp on
- The brake circuit does not work and the warning lamp comes on
- ABS, traction control, stability and anti-skid do not work
- Traction control does not work
Hva feilen kan påvirke3
- ABS is disabled
- Electronic brake force distribution (EBD), traction control, stability control and brake assist are disabled
- Active yaw control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.