Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-0065
    VOLVO

    BCM-0065 - Stop lamp switch. Faulty signal

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
    • Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9

    Hva betyr feilkoden?

    Relevant only on four-wheel-drive cars that have the TRACS traction system. The brake control module (BCM) compares the signal from the brake light switch with the signal from the pedal position sensor. If either signal is faulty, the code is set. The fault mainly affects traction control and may be due to the wiring or to one of the sensors.

    Mulige årsaker

    • Signal wire to the brake light switch shorted to ground or supply voltage
    • Defective brake light switch
    • Defective pedal position sensor

    Hva du kan gjøre

    1. 1If the ECM or CEM holds codes for the brake pedal sensor or brake light switch, deal with those first
    2. 2Check the connectors at the brake control module, the brake light switch and the pedal position sensor for contact resistance and oxidation
    3. 3Read the brake light switch status and the pedal position with diagnostic equipment while the brake pedal is pressed and released
    4. 4The brake system is safety critical: have a workshop repair the fault, and do not work on the brake pedal sensors or the brake light switch yourself

    Symptomer du kan merke1

    • Traction control does not work

    Hva feilen kan påvirke1

    • Traction control (TC) is disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.