VOLVO
BCM-0071 - Pump motor. Signal missing
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) has registered that the ABS pump motor is not starting, or that its signal is absent. The pump motor builds the brake pressure that ABS needs, so without it ABS, stability control and brake assist do not work.
Mulige årsaker
- Poor contact in the connections
- Blown fuse for the pump motor
- Open circuit in the supply wire to the pump motor
- Open circuit in the pump motor's ground wire
- Defective pump motor
- Faulty brake control module (uncommon)
Hva du kan gjøre
- 1Check the pump motor fuse in the engine bay relay and fuse box, and test the circuit beyond it if the fuse has failed
- 2Check the connectors at the brake control module and the pump motor for contact resistance and oxidation
- 3Run the pump motor with diagnostic equipment and check that it starts and appears to run normally
- 4The brake system is safety critical: do not work on the hydraulic unit or pump motor yourself; have a workshop repair the fault
Symptomer du kan merke5
- General warning lamp on
- ABS warning lamp on
- ABS, traction control and stability function do not work
- Anti-skid does not work
- If the fault is intermittent, the ABS lamp may only go out some way into the next drive
Hva feilen kan påvirke2
- ABS, traction control, stability control and brake assist are disabled
- The brakes still work but without ABS regulation
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.