VOLVO
BCM-0072 - Pump motor. Mechanical fault
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) has registered that the ABS pump motor does not start. The pump motor is needed to build up brake pressure during ABS regulation.
Mulige årsaker
- Poor contact in the connections
- Defective fuse for the pump motor
- Open circuit in the voltage supply to the pump motor
- Open circuit in the pump motor's ground wire
- Defective pump motor
- Fault in the brake control module
Hva du kan gjøre
- 1Check the pump motor fuse in the engine bay relay and fuse box
- 2Check the connectors at the brake control module and the pump motor for contact resistance and oxidation
- 3Run the pump motor with diagnostic equipment and check that it starts and runs as it should
- 4The brake system is safety critical: do not work on the hydraulic unit or pump motor yourself; have a workshop repair the fault
Symptomer du kan merke5
- General warning lamp on
- ABS warning lamp on
- ABS and anti-skid do not work
- Stability function does not work
- Traction control does not work and the information lamp is on
Hva feilen kan påvirke1
- ABS, traction control, stability control, active yaw control (AYC) and brake assist are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.