VOLVO
BCM-0082 - Yaw rate sensor. Incorrect offset value
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
Applies only to cars fitted with DSTC. The yaw rate sensor, which measures how fast the car rotates about its vertical axis, sits in the AYC sensor and has an offset correction value. The code is set when that correction value is wrong, and the fault is often due to how the sensor is fitted.
Mulige årsaker
- AYC sensor incorrectly fitted
- AYC sensor loose or its bracket bent
- Internal fault in the AYC sensor
- Stability sensor (BSC) incorrectly fitted, loose or with a bent bracket
Hva du kan gjøre
- 1Check that the AYC sensor is firmly fitted and correctly mounted on the bracket under the front passenger seat
- 2Make sure the bracket has not been bent or damaged in some other way, and that the stability sensor (BSC) is secure
- 3Do not replace the brake control module for this code; have a workshop repair the sensor or bracket after fault-finding
- 4The brake system is safety critical: drive carefully until the fault is fixed, as the stability system does not work, and do not work on brake system sensors yourself
Symptomer du kan merke5
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
- Information lamp on
- Traction control does not work
Hva feilen kan påvirke3
- Traction control (TC) and stability control (SC) are disabled
- Active yaw control (AYC) is disabled
- Roll stability control (RSC) is disabled on cars that have it
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.