VOLVO
BCM-0083 - Angle of lean sensor. Incorrect offset value
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
Applies only to cars fitted with DSTC. The lean angle sensor, which is fitted on cars with RSC, measures the car's lean from side to side and is built into the AYC sensor. The code is set when the sensor's offset correction value is wrong, and the fault is most often due to how the AYC sensor is fitted.
Mulige årsaker
- AYC sensor incorrectly fitted
- AYC sensor loose
- Bracket of the AYC sensor bent
- Internal fault in the AYC sensor
Hva du kan gjøre
- 1Check that the AYC sensor is firmly fitted and correctly mounted on the bracket under the front passenger seat
- 2Make sure the bracket has not been bent or damaged in some other way
- 3The brake system is safety critical: do not replace the brake control module for this code, and have a workshop repair the sensor or bracket
Symptomer du kan merke3
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Hva feilen kan påvirke2
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
- Roll stability control (RSC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.