VOLVO
BCM-0096 - Sensor cluster. Faulty signal
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2008–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2008–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2008–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The stability sensor (BSC) gives the brake control module information about the car's sideways movement and its acceleration to the side and straight ahead. The code is set when the wrong variant of the stability sensor has been fitted. The fault can only be detected once the module's test has started and certain conditions are met.
Mulige årsaker
- A four-wheel-drive stability sensor is fitted in a two-wheel-drive car with a particular gearbox
Hva du kan gjøre
- 1Check that the correct stability sensor is fitted for the car's drivetrain and gearbox, and replace it with the right model if the wrong one is fitted
- 2Check that the sensor is correctly fitted and that its connectors are secure
- 3The brake system is safety critical: do not replace the brake control module for this code, and have a workshop check the stability sensor
Symptomer du kan merke3
- Yellow warning symbol and message in the display
- Anti-spin function does not work
- Stability function does not work
Hva feilen kan påvirke3
- Traction control (TC) is disabled
- Stability control (SC) is disabled
- Active yaw control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.