VOLVO
BCM-0103 - Pedal position sensor. Faulty signal
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The pedal position sensor tells the brake control module how far the brake pedal is pressed and how quickly. The module uses this to activate active brake assist during an emergency stop. The code is set when the sensor signal is faulty.
Mulige årsaker
- Open circuit in the signal or supply wire
- Wires shorted to ground or supply voltage
- Incorrectly fitted or damaged sensor
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Check the connectors at the brake control module and the pedal position sensor for contact resistance and oxidation
- 2Read the pedal sensor position and signal with diagnostic equipment while the pedal is pressed and released
- 3Check the wiring between the pedal position sensor and the brake control module for open circuits and short circuits
- 4The brake system is safety critical: do not work on the brake pedal sensor yourself, and have a workshop repair the fault
Symptomer du kan merke2
- General warning lamp on
- Traction control does not work
Hva feilen kan påvirke2
- Active brake assist (BA) is disabled
- Traction control on the rear wheels is lost on cars with TRACS, but front-wheel control still works
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.