VOLVO
BCM-0108 - Communication between control modules. Communication with the steering angle sensor. Control module not initiated
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The steering angle sensor module (SAS) is initialised when the steering wheel is turned to either side after the car is started. If the brake control module finds that SAS has not been initialised in time, and the car has also been driven for a while, the code is set. This can happen if the driver has driven straight ahead for a long time and switched off the ignition before initialisation.
Mulige årsaker
- The driver drove straight ahead for a long time after starting and then switched off the ignition, so SAS was not initialised
- Internal fault in the steering angle sensor (SAS)
Hva du kan gjøre
- 1Check whether the car was recently driven straight ahead for a long time without the steering wheel being turned, and turn the wheel to either side after starting to initialise SAS
- 2Clear the code and check whether it returns
- 3If the fault remains, have a workshop read the codes in SAS with diagnostic equipment
- 4The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-skid does not work
Hva feilen kan påvirke1
- Active yaw control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.