VOLVO
BCM-0111 - Communication between control modules. Check of the steering angle sensor tolerances has not been run
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module registers that the wheel or steering alignment is incorrect, so the check of the steering angle sensor tolerances has not been carried out. The code is set in that case.
Mulige årsaker
- Incorrect wheel or steering alignment
- Defective steering angle sensor
Hva du kan gjøre
- 1Have a workshop check the wheel and steering alignment and adjust them if needed
- 2Check that the steering angle sensor is correctly fitted and undamaged
- 3The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptomer du kan merke5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Hva feilen kan påvirke1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.