VOLVO
BCM-0113 - Back-up (reversing) signal. Signal missing
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module receives information about the selected gear, from the central electronic module on manual gearboxes or from the transmission control module on automatics. When reverse is selected, the stability function must not be able to activate. The code is set if the signal is disturbed or missing, or if it indicates reverse while the car is moving forward for a while.
Mulige årsaker
- Open circuit or short in the circuit to the reversing light switch on manual gearboxes
- Interference or a short on the CAN wire
- Gear selector position fault registered by the transmission control module
Hva du kan gjøre
- 1Check whether codes for communication or the reversing lights are stored in the central electronic module and fault-find those first
- 2Check the wiring and connectors for the gearbox on automatic gearboxes
- 3Check the gearbox signal with diagnostic equipment
- 4The brake system is safety critical: do not replace the brake control module for this code, and have a workshop repair the fault
Symptomer du kan merke1
- No noticeable symptoms
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.