Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-0114
    VOLVO

    BCM-0114 - Communication with the active yaw control sensor. Signal missing

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
    • Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9

    Hva betyr feilkoden?

    The brake control module registers that the signal from the AYC sensor is missing or faulty. The AYC sensor contains the sensors that the stability function needs, and without them the stability function cannot be regulated.

    Mulige årsaker

    • Contact resistance in the connections
    • Broken wire between the brake control module and the AYC sensor
    • AYC sensor not connected
    • Internal fault in the AYC sensor

    Hva du kan gjøre

    1. 1Check the connectors at the brake control module and the AYC sensor for contact resistance and oxidation
    2. 2Check the wiring between the AYC sensor and the brake control module for short circuits and open circuits
    3. 3If the code is intermittent, poor contact has probably been the cause; if the fault remains, have a workshop check the AYC sensor
    4. 4The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed

    Symptomer du kan merke5

    • Anti-spin warning lamp on
    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work

    Hva feilen kan påvirke1

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.