VOLVO
BCM-0116 - Communication with the active yaw control sensor. Communication problems
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module registers that communication with the AYC sensor is not working. Communication runs over the CAN network, so the fault may lie in the wiring, in the AYC sensor or in the brake control module itself.
Mulige årsaker
- CAN communication wires shorted to each other
- CAN communication wires shorted to ground or supply voltage
- Internal fault in the AYC sensor
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Check the connectors at the brake control module and the AYC sensor for contact resistance and oxidation
- 2Check the wiring between the AYC sensor and the brake control module for short circuits and open circuits
- 3If the code status is intermittent, poor contact has probably been the cause; if the fault remains, have a workshop check it
- 4The brake system is safety critical: do not replace the brake control module unless a workshop has confirmed an internal fault, and drive carefully until the fault is fixed
Symptomer du kan merke5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Hva feilen kan påvirke1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.