Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-0117
    VOLVO

    BCM-0117 - Communication with the active yaw control sensor. An incorrect active yaw control sensor had been installed

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
    • Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9

    Hva betyr feilkoden?

    There are two versions of the AYC sensor, one for two-wheel-drive cars and one for four-wheel-drive cars. If the brake control module finds that an AYC sensor not suited to the car has been fitted, the code is set. The fault is caused by the wrong sensor being fitted, not by the brake control module.

    Mulige årsaker

    • The wrong AYC sensor is fitted

    Hva du kan gjøre

    1. 1Check that the correct AYC sensor is fitted for the car's drivetrain, and replace it with the right one if not
    2. 2The brake system is safety critical: do not replace the brake control module for this code, and have a workshop check the sensor
    3. 3After fitting the correct sensor, check that the fault has cleared and that the stability function works

    Symptomer du kan merke5

    • Anti-spin warning lamp on
    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work

    Hva feilen kan påvirke1

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.