Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-0123
    VOLVO

    BCM-0123 - Active yaw control sensor. Internal fault

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (10)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Alle motorer unntatt: B6324S5

    Hva betyr feilkoden?

    The brake control module sets the code if the voltage to the AYC sensor is outside its reference value, or if the sensor itself has registered an internal fault. The cause may be signals that disturb the sensor, too low a voltage or an internal fault in the AYC sensor.

    Mulige årsaker

    • Signals that disturb the AYC sensor
    • Voltage to the AYC sensor too low
    • Internal fault in the AYC sensor

    Hva du kan gjøre

    1. 1Check the connectors at the brake control module and the AYC sensor for contact resistance and oxidation
    2. 2Read the sensor's current values with diagnostic equipment and compare them with normal values for each sensor
    3. 3If the voltage is wrong, the control module needs checking; if the voltage is correct, have a workshop check the AYC sensor
    4. 4The brake system is safety critical: do not replace the brake control module unless a fault is confirmed, and drive carefully until the fault is fixed

    Symptomer du kan merke5

    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work
    • Traction control does not work

    Hva feilen kan påvirke1

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.