Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    BCM-0129
    VOLVO

    BCM-0129 - Longitudinal accelerometer. Signal outside its permitted range.

    System

    Bremsestyring (BCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    5 modeller

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
    • Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
    • Volvo XC90 (2003–)2013–2014Kun motor: B5254T9

    Hva betyr feilkoden?

    The longitudinal accelerometer sits in the AYC sensor and sends its value to the brake control module on its own CAN wire. It is only fitted to four-wheel-drive cars. The code is set when the signal from the sensor is implausible, and the fault may come from interference, low voltage, incorrect wheel alignment or an internal fault in the sensor.

    Mulige årsaker

    • Interference or noise on the wires that has disturbed the AYC sensor's calculations
    • Supply voltage to the AYC sensor too low
    • Incorrect wheel alignment
    • Internal fault in the AYC sensor

    Hva du kan gjøre

    1. 1Check the connectors at the brake control module and the AYC sensor for contact resistance and oxidation
    2. 2Make sure no interference source, such as a mobile phone or radio receiver, sits too close to the AYC sensor
    3. 3If the code status is intermittent, poor contact or an interference source has probably been the cause; if the fault remains, have a workshop check the sensor
    4. 4The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed

    Symptomer du kan merke5

    • Anti-spin warning lamp on
    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work

    Hva feilen kan påvirke2

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
    • Roll stability control (RSC) is disabled on cars that have it

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.