VOLVO
BCM-0131 - Brake pressure sensor. Faulty signal
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The pressure sensor inside the hydraulic unit gives the brake control module information about the pressure in the brake system. The code is set when the signal is faulty. The fault may lie in the sensor in the hydraulic unit or in the brake control module itself, and it may be intermittent.
Mulige årsaker
- Pressure sensor in the hydraulic unit not working
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Clear the code and check whether it returns; if it does not, the fault may have been a temporary disturbance
- 2Read the fault status with diagnostic equipment
- 3If the fault remains, have a workshop replace the hydraulic unit
- 4The brake system is safety critical: do not work on the hydraulic unit yourself, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Traction control does not work
- Stability function does not work
- The anti-spin and anti-skid lamps show a fault or no indication
Hva feilen kan påvirke1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.