VOLVO
BCM-0134 - Brake pressure sensor. Incorrect offset value
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The pressure sensor in the hydraulic unit has an offset value, a correction value for the sensor's own deviation. The code is set when the module detects that the offset value is wrong. The fault is most often in the sensor or in an internal fault in the brake control module.
Mulige årsaker
- Pressure sensor not working
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Clear the code and check whether it returns; if it does not, the fault may have been a temporary disturbance
- 2Read the fault status with diagnostic equipment
- 3If the fault remains, have a workshop replace the hydraulic unit
- 4The brake system is safety critical: do not work on the hydraulic unit yourself, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Information lamp on
- Traction control does not work
- Stability function does not work
Hva feilen kan påvirke1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.