VOLVO
BCM-0136 - Brake pressure sensor 1 and 2. Signal outside its permitted range
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
Brake pressure sensors 1 and 2 give the brake control module information about the pressure in the brake system. The code is set when the module judges that the signal from one of the sensors is implausible. The fault may come from a broken earth wire, a fault in the brake circuit or a damaged sensor.
Mulige årsaker
- Open circuit in the earth wire
- Fault in the brake circuit
- Defective pressure sensor
Hva du kan gjøre
- 1Check the earth wires to the pressure sensors and the brake control module for breaks and corrosion
- 2Read the brake system pressure with diagnostic equipment while the brake pedal is pressed
- 3As the wires can be swapped during fitting, both sensors should be checked
- 4The brake system is safety critical: do not work on the brake system yourself, and have a workshop repair the fault
Symptomer du kan merke5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Hva feilen kan påvirke1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.