VOLVO
BCM-0151 - Control module. Internal memory fault
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The brake control module has an internal memory fault. More precisely, initialisation of the CAN controller fails when the module is powered up, and then CAN communication is shut down.
Mulige årsaker
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Read the codes in the other control modules and deal with any other codes first
- 2Check that the connector at the brake control module is secure and free from oxidation
- 3If the code has permanent status, a workshop should replace the brake control module, and the new unit must be programmed
- 4The brake system is safety critical: do not work on the brake control module yourself, and drive carefully until the fault is fixed
Symptomer du kan merke5
- ABS warning lamp on
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid does not work
Hva feilen kan påvirke2
- ABS, traction control, stability control and active yaw control (AYC) are disabled
- Communication with the brake control module is cut off entirely
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.