VOLVO
BCM-A030 - Communication between control modules. Steering angle sensor. Initialization check not run
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
The steering angle sensor module (SAS) is initialised by moving the steering wheel a short distance soon after the ignition is switched on. The code is set if the steering angle has not been initialised after a period of driving at higher speed. Initialisation can still be carried out after the code is stored, and the anti-spin warning lamp then goes out.
Mulige årsaker
- Steering angle sensor not initialised after a long period of driving at higher speed
Hva du kan gjøre
- 1Turn the steering wheel to either side to initialise the steering angle sensor; if the anti-spin warning lamp goes out, the fault has been cleared
- 2Clear the code and check whether it returns
- 3If the fault remains, have a workshop read the codes in the steering angle sensor module with diagnostic equipment
- 4The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-skid does not work
Hva feilen kan påvirke1
- Active yaw control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.