VOLVO
BCM-A031 - Communication between control modules. Steering angle sensor. Tolerance check not run
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle motorer unntatt: B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: B5254T9
Hva betyr feilkoden?
After the steering angle sensor has been initialised, a plausibility check of the steering angle is carried out. The code is set if the check is not passed while the car is driven above a certain speed. The check may finish after the code has been set, but before the ignition is switched off.
Mulige årsaker
- Plausibility check of the steering angle has not been passed
Hva du kan gjøre
- 1Drive the car so that the check can finish, then clear the code and check whether it returns
- 2If the fault remains, have a workshop check the plausibility of the steering angle sensor and the wheel alignment
- 3The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptomer du kan merke3
- Anti-spin warning lamp on
- General warning lamp on
- Anti-skid does not work
Hva feilen kan påvirke1
- Active yaw control (AYC) is disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.