VOLVO
BCM-A032 - Stability function. Too long stability control
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S60 (2001–2009)2003–2009
- Volvo S80 (1999–2006)2003–2006
- Volvo V70 (2000–2008)2003–2008
- Volvo V70 XC / XC70 (2001–2007)2003–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle motorer unntatt: B8444S
- Volvo XC90 (2003–)2007Kun motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle motorer unntatt: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle motorer unntatt: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Alle motorer unntatt: B6324S5
Hva betyr feilkoden?
If during the previous driving cycle the brake control module has run an extended start-up check of the stability system because of several different faults, the code is set in the next driving cycle. The code is a consequence of earlier faults.
Mulige årsaker
- Code was set in the previous driving cycle
Hva du kan gjøre
- 1Clear the code if it is stored on its own; if another stability regulation code is stored too, fault-find that one first
- 2Read and deal with other codes according to their information
- 3The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptomer du kan merke1
- Information lamp on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.