VOLVO
BCM-B10DF46 - Master cylinder isolation valve. System Internal Failures. Calibration / parameter memory failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module is delivered calibrated from the factory and checks at start-up that its calibration data is correct. The code is set when the module lacks calibration data or when calibration has not been carried out. The fault may remain after a module has been replaced until it has been calibrated.
Mulige årsaker
- The fitted brake control module lacks calibration data
- Calibration of the brake control module has not been carried out
- Damaged brake control module
Hva du kan gjøre
- 1Clear the codes in the brake control module and check whether the code returns
- 2If the code returns, a workshop should replace the brake control module
- 3After fitting, the acceleration sensor and the internal sensors of the brake control module must be calibrated; have a workshop do this
- 4The brake system is safety critical: do not work on the brake control module or its calibration yourself, and have a workshop repair the fault
Symptomer du kan merke5
- Information lamp on
- Anti-spin does not work
- ABS does not work or switches on suddenly
- Hill start assist does not work
- Forward monitoring and adaptive cruise control do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.