VOLVO
BCM-C001001 - Left Front Inlet Control. General Failure Information. General electrical failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (16)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module has registered an electrical fault in the inlet valve for the left front wheel in the hydraulic unit. The inlet valve controls brake pressure to the wheel during ABS and stability regulation. The fault may be due to an internal disturbance or a fault in the module.
Mulige årsaker
- Fault inside the brake control module (BCM)
Hva du kan gjøre
- 1Activate the valves in the hydraulic unit with diagnostic equipment; if no ticking sound is heard, the module has an internal fault
- 2Clear the code and road test; if it returns, a workshop should replace the brake control module
- 3After replacement, programming and calibration are needed, as a new module is supplied without software
- 4The brake system is safety critical: do not work on the brake control module or hydraulic unit yourself, and drive carefully until the fault is fixed
Symptomer du kan merke5
- Information lamp on
- General warning lamp on
- The brake circuit does not work and the warning lamp comes on
- Traction control does not work
- Anti-spin and anti-skid do not work
Hva feilen kan påvirke3
- ABS is disabled
- Traction control, stability control and active yaw control (AYC) are disabled
- Electronic brake force distribution (EBD) and brake assist are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.