VOLVO
BCM-C002201 - Brake Booster Solenoid. General Failure Information. General electrical failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
On cars with the DSTC stability system, the brake control module (BCM) controls a pre-pressure valve that admits air into the brake booster during stability control and anti-skid, so that brake pressure rises automatically. If the module receives a signal from the valve that it cannot accept as reasonable, the code is set.
Mulige årsaker
- Contact resistance or oxidation in connectors or joints
- Wires shorted to ground or to supply voltage
- Incorrectly fitted sensor
- Damaged pre-pressure valve
- Internal fault in the brake control module
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the brake control module and the pre-pressure valve for contact resistance and oxidation
- 4Check the wiring to the valve for breaks, chafing and short circuits to ground or supply voltage
- 5Activate the pre-pressure valve with diagnostic equipment and check that its status changes
- 6The braking system is safety critical: do not work on the pre-pressure valve or brake booster yourself; leave this to a workshop
Symptomer du kan merke5
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Hva feilen kan påvirke1
- Traction control, stability control, active yaw control and brake assistance are blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.