VOLVO
BCM-C003007 - Left Front Tone Wheel. General Failure Information. Mechanical Failures
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (19)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) has received a disturbed or interrupted signal from the left front wheel speed sensor many times. The sensor reads a tone wheel on the wheel hub, and the fault is most often mechanical: a loose sensor, a damaged tone wheel or dirt between the tone wheel and the sensor. The code is not caused by an internal fault in the module.
Mulige årsaker
- Loose wheel speed sensor
- Damaged or dirty tone wheel
- Dirt or metal particles between the tone wheel and the sensor
- Damaged wiring or connectors to the sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Make sure the wheel sensor sits tight against its mounting and that grit or rust is not trapped underneath it
- 3Check that the tone wheel is intact, clean and secure, with no missing or damaged teeth
- 4Check that the brake calipers and wheel bearings are not sticking or have play, as a locked wheel gives no signal
- 5Do not replace the brake control module, as it is normally not the fault. Have a workshop check the connectors and wiring with diagnostic equipment
- 6The braking system is safety critical: do not work on the ABS system yourself, and drive carefully until the fault is fixed
Symptomer du kan merke5
- ABS warning lamp and general warning lamp on
- ABS, traction control and stability function do not work
- Adaptive cruise control and collision warning do not work
- Electronic parking brake has reduced function
- Front monitoring and City Safety do not work
Hva feilen kan påvirke2
- ABS, traction control, stability control and brake assistance are blocked
- Electronic brake force distribution is disabled if two or more wheel sensors stop working
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.