VOLVO
BCM-C004728 - Brake Booster Pressure Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (16)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The vacuum sensor in the brake booster has a stored correction value (offset) for its individual deviation, and the brake control module has found that the value is incorrect. The sensor's vacuum signal therefore cannot be used reliably.
Mulige årsaker
- Open circuit in the signal wire
- Signal wire shorted to supply voltage or ground
- Damaged vacuum pressure sensor
- Internal fault in the brake control module
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Start the engine, press the brake pedal and have a workshop read the vacuum pressures with diagnostic equipment. They should update and agree
- 3If the vacuum pressures do not agree, the vacuum sensor needs replacing by a workshop
- 4Check that the connector at the vacuum sensor is secure and free from oxidation
- 5The braking system is safety critical: do not work on the brake booster yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptomer du kan merke2
- Information lamp lit
- Yellow warning symbol and message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.