VOLVO
BCM-C005128 - Steering Wheel Position Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The brake control module (BCM) compares the steering angle from the steering angle sensor with a calculated correction value for the sensor's individual deviation. When the calculated value conflicts with where the wheel is pointing, the code is set. The fault most often comes from the steering wheel or front axle not being set up correctly, not from the brake control module.
Mulige årsaker
- Steering wheel incorrectly fitted
Hva du kan gjøre
- 1Make sure the front axle is correctly aligned and that the steering wheel is correctly fitted before doing anything else
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Read the steering angle with diagnostic equipment when the wheel is straight ahead and at left and right lock
- 4When the wheel angle reading is off, a workshop zeroes it and recalibrates the stability system
- 5Steering and the stability system are safety critical: do not work on them yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptomer du kan merke5
- Traction control warning lamp on
- Stability function does not work
- Traction control does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
Hva feilen kan påvirke2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.