Hva betyr feilkode BCM-C006154?

Diagnose og feilkodedefinisjon for BCM-C006154 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

BCM-C006154 - Lateral Acceleration Sensor. System Programming Failures. Missing calibration

System

Bremsestyring (BCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

6 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)

Vis modeller per årsmodell og motor (7)

Hva betyr feilkoden?

On cars with DSTC, the brake control module (BCM) has found that the calibration of the stability sensor is missing or has been reset. The code may be set after the stored offset values have been cleared, for example during a software update, and then it only needs clearing.

Mulige årsaker

The code may be set after the offset values for the sensors in the stability sensor have been reset
Damaged brake control module

Hva du kan gjøre

1If the code was stored during a software update, clearing it is enough. Then road test the car to see whether it returns
2Have a workshop calibrate the brake control module following the manufacturer's instructions with diagnostic equipment, then clear the code
3After calibration, read the code status; if it now shows as intermittent, the fault is no longer present
4If the code returns after calibration, the brake control module normally needs replacing by a workshop
5The braking system is safety critical: do not carry out the calibration yourself; leave this to a workshop, and drive carefully until the fault is fixed

Symptomer du kan merke5

Information lamp lit
Traction control does not work
Stability function does not work
Anti-spin function does not work
Yellow warning symbol and message in the display

Hva feilen kan påvirke3

Traction control is blocked
Stability control is blocked
Active yaw control (AYC) is blocked

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.