VOLVO
BCM-C006228 - Longitudinal Acceleration Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (15)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015Kun girkasse: TF-80SC AWD
- Volvo S80 (2007–)2007–2015
- Volvo V40 Cross Country (2013–)2013–2015Kun girkasse: TF-80SD AWD
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012Kun girkasse: TF-80SC AWD
- Volvo V60 (2011–)2013–2015
- Volvo V60 Cross Country (2015–)2015Kun girkasse: TF-80SC AWD
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC60 (2009–)2013–2015Kun girkasse: M66 AWD, TF-80SC AWD
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
The longitudinal acceleration sensor, which sits in the stability sensor, has a correction value for its individual deviation that the brake control module judges to be unreasonable. The fault most often lies in how the stability sensor is fitted, not in the brake control module.
Mulige årsaker
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the stability sensor is secure and correctly fitted, and that the bracket is not bent
- 3Have a workshop check the sensor calibration with diagnostic equipment
- 4Read the codes in the other modules too, as this code can be a knock-on effect of a fault in another module
- 5If the fault remains after these checks, the stability sensor needs replacing by a workshop. The braking system is safety critical, so do not work on it yourself
Symptomer du kan merke5
- Anti-spin function does not work
- Stability function does not work
- Cruise control will not engage
- Front monitoring and active safety do not work
- Brake pedal requires more force than normal
Hva feilen kan påvirke2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.