VOLVO
BCM-C006254 - Longitudinal Acceleration Sensor. System Programming Failures. Missing calibration
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
On the V40, the longitudinal acceleration sensor, which is part of the acceleration sensor (IMU), has not been calibrated. The code is often set after the brake control module or the airbag control module has been replaced, and the stability functions are then blocked until calibration is done.
Mulige årsaker
- Brake control module replaced
- Airbag control module replaced
Hva du kan gjøre
- 1If the airbag control module has been replaced, the acceleration sensor must be calibrated first, and then the brake control module
- 2If only the brake control module has been replaced, it is enough to calibrate that module
- 3After calibration, read the code status and road test the car to check that the fault is fixed
- 4The braking system and airbags are safety critical: do not work on the calibration yourself; leave this to a workshop
Symptomer du kan merke1
- Anti-spin and anti-skid indication shows a fault or no indication
Hva feilen kan påvirke3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.