VOLVO
BCM-C006301 - Yaw Rate Sensor. General Failure Information. General electrical failure
System
Bremsestyring (BCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The brake control module (BCM) receives no reliable signal from the yaw rate sensor in the stability sensor. The yaw rate sensor measures how the car rotates about its vertical axis, and the stability functions need it to control the car safely.
Mulige årsaker
- Open circuit or short to ground in the wires to the AYC sensor
- Internal fault in the AYC sensor
- Internal fault in the stability sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the stability sensor for breaks and short circuits to ground
- 3Check that the correct stability sensor is fitted, particularly on all-wheel drive cars
- 4Read the sensor status with diagnostic equipment. Replace the stability sensor if the fault remains and the wiring is intact
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptomer du kan merke5
- General warning lamp on
- Anti-spin and stability function do not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
- Traction control does not work
Hva feilen kan påvirke2
- Traction control, stability control and dynamic stability control (AYC) are blocked
- Roll stability control (RSC) is blocked on cars that have it
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.